1999 LAND ROVER RANGE ROVER Recall Check

Recall #:

00V328000

Recall Date:

2000-10-26

Component(s):

ENGINE AND ENGINE COOLING: COOLING SYSTEM: HOSES/LINES/PIPING/FITTINGS

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. COOLANT SYSTEM LEAKS HAVE BEEN IDENTIFIED IN AREAS WHERE THE COOLANT COULD BE SUBJECTED TO ELEVATED TEMPERATURES.

Recall #:

00V329000

Recall Date:

2000-10-26

Component(s):

VEHICLE SPEED CONTROL

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE CAST ALLOY THROTTLE BODY IS HEATED BY FLUID BLED FROM THE COOLING SYSTEM, TO PREVENT ICING IN EXTREMELY COLD WEATHER CONDITIONS. THIS FLUID PASSES THROUGH A SMALL ATTACHMENT (PLATE) TO THE THROTTLE BODY, WHICH UTILIZES A CORK GASKET. THE CORK GASKET HAS PROVEN TO BE UNRELIABLE IN THIS APPLICATION. CONSEQUENTLY, COOLANT FLUID CAN LEAK FROM THE INTERFACE BETWEEN THE DE-ICER PLATE AND THE THROTTLE BODY.

Recall #:

00V142001

Recall Date:

2000-10-19

Component(s):

ELECTRONIC STABILITY CONTROL: AUTOMATIC (ASC)

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE LOADING CONDITIONS ON THE VEHICLE'S LEFT SIDE ENGINE IDLER PULLEY CAN EXCEED THE MAXIMUM CALCULATED FIGURE OF THE ORIGINAL DESIGN SPECIFICATION. THE MATERIAL OF THE PULLEY CAN FRACTURE AND ULTIMATELY FAIL. FAILURE OF THE PULLEY MATERIAL CAN CAUSE THE PULLEY TO THROW OFF THE SERPENTINE BELT.

Recall #:

00V377000

Recall Date:

2000-11-29

Component(s):

POWER TRAIN: AUTOMATIC TRANSMISSION

VEHICLE DESCRIPTION: CERTAIN SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 114, "THEFT PROTECTION." WATER CONTAMINATION OF THE AUTOMATIC TRANSMISSION OIL CAN LEAD TO VARIOUS FAILURE MODES OF THE TRANSMISSION. ONE OF THESE FAILURE MODELS RESULTS IN INCORRECT OPERATION OF THE PARK LOCK FUNCTION THAT COULD ALLOW A VEHICLE TO ROLL AWAY IF PARKED WITHOUT THE HANDBRAKE PROPERLY SET.

Recall #:

99V007000

Recall Date:

1999-01-21

Component(s):

ENGINE AND ENGINE COOLING

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. AS A RESULT OF WATER INGRESS AND SUBSEQUENT ICE BLOCKAGE, THE TRANSMISSION BREATHER TUBE CAN BECOME CLOGGED, EXPELLING TRANSMISSION FLUID FROM THE DIPSTICK TUBE ONTO HOT ENGINE COMPONENTS.