NISSAN STANZA Recall Check

Recall #:

95V244000

Recall Date:

1996-01-02

Component(s):

FUEL SYSTEM, GASOLINE: STORAGE: TANK ASSEMBLY: FILLER PIPE AND CAP

IT IS POSSIBLE FOR A MIXTURE OF MUD AND SALT TO GET TRAPPED BETWEEN THE FUEL FILLER TUBE AND WHEEL HOUSING. THE TRAPPED MUD AND SALT CAN RESULT IN CORROSION OF THE FUEL FILLER TUBE AND THE WHEEL HOUSING.

Recall #:

95V244000

Recall Date:

1996-01-02

Component(s):

FUEL SYSTEM, GASOLINE: STORAGE: TANK ASSEMBLY: FILLER PIPE AND CAP

IT IS POSSIBLE FOR A MIXTURE OF MUD AND SALT TO GET TRAPPED BETWEEN THE FUEL FILLER TUBE AND WHEEL HOUSING. THE TRAPPED MUD AND SALT CAN RESULT IN CORROSION OF THE FUEL FILLER TUBE AND THE WHEEL HOUSING.

Recall #:

95V244000

Recall Date:

1996-01-02

Component(s):

FUEL SYSTEM, GASOLINE: STORAGE: TANK ASSEMBLY: FILLER PIPE AND CAP

IT IS POSSIBLE FOR A MIXTURE OF MUD AND SALT TO GET TRAPPED BETWEEN THE FUEL FILLER TUBE AND WHEEL HOUSING. THE TRAPPED MUD AND SALT CAN RESULT IN CORROSION OF THE FUEL FILLER TUBE AND THE WHEEL HOUSING.

Recall #:

90V072000

Recall Date:

1990-07-02

Component(s):

EQUIPMENT: OTHER: LABELS

INCORRECT TIRE INFLATION PRESSURES WERE PRINTED ON CERTIFICATION LABELS.

Recall #:

90V072000

Recall Date:

1990-07-02

Component(s):

EQUIPMENT: OTHER: LABELS

INCORRECT TIRE INFLATION PRESSURES WERE PRINTED ON CERTIFICATION LABELS.

Recall #:

90V072000

Recall Date:

1990-07-02

Component(s):

EQUIPMENT: OTHER: LABELS

INCORRECT TIRE INFLATION PRESSURES WERE PRINTED ON CERTIFICATION LABELS.

Recall #:

86V101000

Recall Date:

1986-07-31

Component(s):

FUEL SYSTEM, GASOLINE: STORAGE: TANK ASSEMBLY: FILLER PIPE AND CAP

IF A CERTAIN TYPE OF REAR END COLLISION OCCURS, THE EDGE OF A WELDED BRACKET ON THE FLOOR PANEL SUBFRAME MAY PIERCE THE FUEL FILLER PIPE. CONSEQUENCE OF DEFECT: FUEL LEAKAGE WOULD OCCUR WHICH COULD RESULT IN A FIRE. VEHICLES WOULD NOT COMPLY WITH FMVSS 301.

Recall #:

82V035000

Recall Date:

1982-04-23

Component(s):

SERVICE BRAKES, HYDRAULIC: PEDALS AND LINKAGES

THE INVOLVED VEHICLES DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 105, "HYDRAULIC BRAKE SYSTEMS", DUE TO THE BRAKE PEDAL HEIGHT BEING ADJUSTED LOWER THAN SPECIFICATIONS. IF A VEHICLE HAS SUCH A MISADJUSTMENT IT COULD ALSO EXPERIENCE PARTIAL BRAKE SYSTEM DISABLEMENT.