CHEVROLET Recall Check

Recall #:

07E088000

Recall Date:

2007-10-30

Component(s):

EQUIPMENT

CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.

Recall #:

07E088000

Recall Date:

2007-10-30

Component(s):

EQUIPMENT

CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.

Recall #:

78V205000

Recall Date:

1979-10-12

Component(s):

PARKING BRAKE: INDICATOR LIGHT

THE PARKING BRAKE SWITCH CONNECTOR CONTAINS ELECTRICAL WIRES THAT MAY BE REVERSED. AS A RESULT, THE LAMP WILL BE ACTIVATED WHENEVER THE IGNITION IS TURNED ON, EVEN THOUGH THE PARKING BRAKE IS NOT ENGAGED. THIS CONSTITUTES A NON-COMPLIANCE TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 105, "HYDRAULIC BRAKE SYSTEMS". THE STANDARD REQUIRES THAT THE INDICATOR LAMP BE ACTIVATED UPON APPLICATION OF THE PARKING BRAKE.

Recall #:

78V206000

Recall Date:

1979-10-12

Component(s):

EQUIPMENT: OTHER: LABELS

THE INVOLVED VEHICLES DO NOT HAVE A BRAKE FLUID RESERVOIR WARNING WHICH STATES, "WARNING, CLEAN FILLER CAP BEFORE REMOVING. USE ONLY DOT 3 FLUID FROM A SEALED CONTAINER". THIS CONSTITUTES A NON-COMPLIANCE TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 105, "HYDRAULIC BRAKE SYSTEMS".

Recall #:

78V071000

Recall Date:

1979-10-12

Component(s):

ENGINE AND ENGINE COOLING: ENGINE

THE INVOLVED VEHICLES DO NOT CONTAIN AN EMERGENCY STOP CONTROL FOR EMERGENCY STOPPING OF THE VEHICLE. THIS EMERGENCY STOP CONTROL IS NECESSARY TO PREVENT ENGINE OVERSPEED AND TO STOP THE ENGINE IN CASE OF A FUEL MALFUNCTION.

Recall #:

01I004000

Recall Date:

2001-06-05

Component(s):

ENGINE AND ENGINE COOLING: COOLING SYSTEM: FAN

THIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH THE SAFETY ACT. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. VEHICLE DESCRIPTION: 1973-1979 LIGHT DUTY PICKUP TRUCKS AND VANS EQUIPPED WITH FLEXIBLE ENGINE COOLING FANS. THE FLEX FANS WERE INSTALLED ON VEHICLES EQUIPPED WITH A HEAVY COOLING SYSTEM AND WITHOUT AIR CONDITIONING. OVER TIME, CRACKS CAN DEVELOP IN THE FAN BLADE DUE TO FATIGUE, ENGINE MODIFICATIONS, OR VEHICLE CRASHES.

Recall #:

78V071000

Recall Date:

1979-10-12

Component(s):

ENGINE AND ENGINE COOLING: ENGINE

THE INVOLVED VEHICLES DO NOT CONTAIN AN EMERGENCY STOP CONTROL FOR EMERGENCY STOPPING OF THE VEHICLE. THIS EMERGENCY STOP CONTROL IS NECESSARY TO PREVENT ENGINE OVERSPEED AND TO STOP THE ENGINE IN CASE OF A FUEL MALFUNCTION.

Recall #:

78V139000

Recall Date:

1979-10-12

Component(s):

ENGINE AND ENGINE COOLING: COOLING SYSTEM: FAN

THE HUB PORTION OF THE FAN BLADE ASSEMBLY COULD CRACK DUE TO HIGH STRESS LEVELS GENERATED DURING ENGINE OPERATING CONDITIONS. EVENTUALLY, THE BLADE COULD BREAK APART AT THE HUB AND BLADE PIECES COULD BE PROPELLED INTO THE ENGINE. IF THE HOOD IS OPEN WHILE THE ENGINE IS RUNNING, THE FRAGMENTS WOULD BE FREE TO FLY FROM THE VEHICLE.

Recall #:

78V139000

Recall Date:

1979-10-12

Component(s):

ENGINE AND ENGINE COOLING: COOLING SYSTEM: FAN

THE HUB PORTION OF THE FAN BLADE ASSEMBLY COULD CRACK DUE TO HIGH STRESS LEVELS GENERATED DURING ENGINE OPERATING CONDITIONS. EVENTUALLY, THE BLADE COULD BREAK APART AT THE HUB AND BLADE PIECES COULD BE PROPELLED INTO THE ENGINE. IF THE HOOD IS OPEN WHILE THE ENGINE IS RUNNING, THE FRAGMENTS WOULD BE FREE TO FLY FROM THE VEHICLE.

Recall #:

78V139000

Recall Date:

1979-10-12

Component(s):

ENGINE AND ENGINE COOLING: COOLING SYSTEM: FAN

THE HUB PORTION OF THE FAN BLADE ASSEMBLY COULD CRACK DUE TO HIGH STRESS LEVELS GENERATED DURING ENGINE OPERATING CONDITIONS. EVENTUALLY, THE BLADE COULD BREAK APART AT THE HUB AND BLADE PIECES COULD BE PROPELLED INTO THE ENGINE. IF THE HOOD IS OPEN WHILE THE ENGINE IS RUNNING, THE FRAGMENTS WOULD BE FREE TO FLY FROM THE VEHICLE.