A Guide to the Requirements for Car Registration
Read this article to discover about car registration.
Read moreLooking for the VIN?
Here is there you’ll find it:
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE AFFECTED VEHICLES WERE BUILT WITH UNPAINTED FUEL TANK STRAPS.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE AFFECTED VEHICLES WERE BUILT WITH INCORRECT CHILD LOCK INSTRUCTION LABELS.
VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES, PICKUP TRUCKS AND SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 225, "CHILD RESTRAINT ANCHORAGE SYSTEMS." SOME OF THE OWNER'S MANUALS FOR THESE VEHICLES ARE MISSING INSTRUCTIONS THAT PROVIDE A STEP-BY-STEP PROCEDURE, INCLUDING DIAGRAMS, FOR PROPERLY ATTACHING A CHILD RESTRAINT SYSTEM'S TETHER STRAP TO THE TETHER ANCHORAGE.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. SOME OF THESE VEHICLES MAY HAVE BEEN BUILT WITH AN INADEQUATE WELD BETWEEN THE RIGHT FRONT BRAKE HOSE BLOCK AND THE STAND-OFF BRACKET.
CERTAIN TIGAS FUEL PUMP MODULES MANUFACTURED BETWEEN JUNE 1 AND SEPTEMBER 24, 2006, SOLD UNDER VARIOUS BRAND NAMES AND P/NOS. THESE FUEL PUMP MODULES ARE SOLD AS AFTERMARKET FOR USE IN CERTAIN DAIMLERCHRYSLER VEHICLES LISTED ABOVE. SILICONE MATERIAL USED IN MANUFACTURE OF THE FLAPPER VALVE WAS OUT-OF-SPECIFICATION, LEADING TO EXCESS SWELL OF THE FLAPPER VALVE RESTRICTING THE FLOW OF FUEL TO THE FUEL PUMP MODULE.
ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH 2.4 LITER ENGINES, THE HIGH PRESSURE POWER STEERING HOSE MAY PREMATURELY HEAT AGE AND DEVELOP A LEAK.
IMPORT PRODUCTS IS RECALLING 30,351 FUEL FILTERS SOLD TO AND BRANDED BY THE AFFINIA GROUP AS CARQUEST P/N 86523, NAPA P/N 3523, AND WIX P/N 33523 FOR USE AS REPLACEMENT EQUIPMENT ON THE VEHICLES LISTED ABOVE. THESE FILTERS MAY DEVELOP A LEAK IN THE HOSE ASSEMBLY AND/OR CONNECTORS DUE TO IMPROPERLY ADHERED LINE CONNECTORS.
QUALIS AUTOMOTIVE IS RECALLING CERTAIN AFTERMARKET BALL JOINTS SOLD FOR USE ON CERTAIN PASSENGER VEHICLES. THE SOCKET MAY HAVE BEEN EXCESSIVELY HARDENED WHICH COULD CAUSE IT TO CRACK NEAR THE RETAINING RING GROOVE ALLOWING THE BALL STUD TO SEPARATE UNDER IMPACT LOAD. THE SUBJECT BALL JOINTS WERE SOLD AS FOUR PART NUMBERS, D10945, D10946, G10945, AND G10946. THE AFFECTED CONTROL ARMS, D10945 AND D10946, ARE STAMPED WITH THE FOLLOWING DATES ON THE BALL JOINTS: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, AND 116609. THE G10945 AND G10946 ARE THE SAME PART AS THE D10945 AND D10946 RESPECTIVELY. THEY ARE LABELED DIFFERENTLY DEPENDING ON THE AFTERMARKET CUSTOMER.
FEDERAL-MOGUL IS RECALLING CERTAIN REPLACEMENT CONTROL ARM ASSEMBLIES, PART NUMBERS K7425, 10945, FA4510X, K7427, 10946, AND FA4611X, SOLD FOR USE ON VARIOUS PASSENGER VEHICLES LISTED ABOVE. THE BALL JOINT ON THE CONTROL ARM ASSEMBLY CAN FAIL CAUSING THE BALL STUD TO WEAR THROUGH THE CONTROL ARM HOUSING RESULTING IN NOISE AND/OR SEPARATION OF THE BALL STUD FROM THE HOUSING.
Title | Year 1 | Year 2 | Year 3 | Year 4 | Year 5 | Total for 5 years |
---|---|---|---|---|---|---|
Depreciation |
Year 1 $512 |
Year 2 $472 |
Year 3 $433 |
Year 4 $394 |
Year 5 $354 |
Total for 5 years: $2,165 |
Insurance |
Year 1 $1,451 |
Year 2 $1,502 |
Year 3 $1,554 |
Year 4 $1,609 |
Year 5 $1,665 |
Total for 5 years: $7,781 |
Fuel |
Year 1 $1,696 |
Year 2 $1,747 |
Year 3 $1,808 |
Year 4 $1,880 |
Year 5 $1,965 |
Total for 5 years: $9,096 |
Maintenance |
Year 1 $2,763 |
Year 2 $2,303 |
Year 3 $1,033 |
Year 4 $665 |
Year 5 $2,291 |
Total for 5 years: $9,055 |
Repair |
Year 1 $1,793 |
Year 2 $1,290 |
Year 3 $1,473 |
Year 4 $1,590 |
Year 5 $1,816 |
Total for 5 years: $7,962 |
Taxes & Fees |
Year 1 $307 |
Year 2 $35 |
Year 3 $44 |
Year 4 $29 |
Year 5 $40 |
Total for 5 years: $455 |
Total for 5 years: $36,512
Discover expert tips, news and advice on buying and maintaining used vehicles
Read this article to discover about car registration.
Read moreIf you are limited in budget, you can consider buying a used or new cheap car....
Read moreOur guide breaks down how to read a Tesla VIN, revealing the details hidden in...
Read more