FORD Recall Check

Recall #:

96V071000

Recall Date:

1996-05-01

Component(s):

ELECTRICAL SYSTEM: IGNITION

THE IGNITION SWITCH COULD EXPERIENCE AN INTERNAL SHORT CIRCUIT.

Recall #:

96V071000

Recall Date:

1996-05-01

Component(s):

ELECTRICAL SYSTEM: IGNITION

THE IGNITION SWITCH COULD EXPERIENCE AN INTERNAL SHORT CIRCUIT.

Recall #:

91V126000

Recall Date:

1991-09-30

Component(s):

STEERING: GEAR BOX (OTHER THAN RACK AND PINION)

BECAUSE OF A MACHINING INCONSISTENCY, THERE IS A HIGH PISTON-TO-BALL CONTACT ANGLE IN THE STEERING GEAR WORM DRIVE. THIS CONTACT CAUSES THE BALLS TO TRY TO ROTATE ON TWO DIFFERENT ROLLING RADII AT TWO DIFFERENT SPEEDS, CAUSING THE BALL TO DAMAGE THE CONTACT SURFACES OF THE PISTON AND SPINDLE DURING STATIC OR LOW SPEED MANEUVERS INVOKING FULL OR NEAR FULL TURNS.

Recall #:

91V126000

Recall Date:

1991-09-30

Component(s):

STEERING: GEAR BOX (OTHER THAN RACK AND PINION)

BECAUSE OF A MACHINING INCONSISTENCY, THERE IS A HIGH PISTON-TO-BALL CONTACT ANGLE IN THE STEERING GEAR WORM DRIVE. THIS CONTACT CAUSES THE BALLS TO TRY TO ROTATE ON TWO DIFFERENT ROLLING RADII AT TWO DIFFERENT SPEEDS, CAUSING THE BALL TO DAMAGE THE CONTACT SURFACES OF THE PISTON AND SPINDLE DURING STATIC OR LOW SPEED MANEUVERS INVOKING FULL OR NEAR FULL TURNS.

Recall #:

91V134000

Recall Date:

1991-08-07

Component(s):

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: DISC: ROTOR

FRONT DISC BRAKE ROTORS OF THE SUBJECT VEHICLES MAY EXPERIENCE SEVERE CORROSION IF OPERATED IN AREAS WHERE CALCIUM CHLORIDE AND SODIUM CHLORIDE ARE USED EXTENSIVELY.

Recall #:

88V077000

Recall Date:

1988-05-13

Component(s):

STEERING: GEAR BOX (OTHER THAN RACK AND PINION)

AN INCORRECT MACHINED PISTON BALL RACE IN THE STEERING GEAR CREATED AN OUT OF TOLERANCE CONDITION.

Recall #:

96V071000

Recall Date:

1996-05-01

Component(s):

ELECTRICAL SYSTEM: IGNITION

THE IGNITION SWITCH COULD EXPERIENCE AN INTERNAL SHORT CIRCUIT.

Recall #:

88V077000

Recall Date:

1988-05-13

Component(s):

STEERING: GEAR BOX (OTHER THAN RACK AND PINION)

AN INCORRECT MACHINED PISTON BALL RACE IN THE STEERING GEAR CREATED AN OUT OF TOLERANCE CONDITION.

Recall #:

88V077000

Recall Date:

1988-05-13

Component(s):

STEERING: GEAR BOX (OTHER THAN RACK AND PINION)

AN INCORRECT MACHINED PISTON BALL RACE IN THE STEERING GEAR CREATED AN OUT OF TOLERANCE CONDITION.

Recall #:

96E017000

Recall Date:

1996-06-27

Component(s):

SUSPENSION: FRONT: CONTROL ARM

EQUIPMENT DESCRIPTION: AFTERMARKET BALL JOINT/CONTROL ARM MANUFACTURED BY MOOG INDUSTRIES. DUE TO MISPACKAGING, CERTAIN BALL JOINT/CONTROL ARM ASSEMBLIES WERE INCORRECTLY PLACED IN THE WRONG BOXES.