2003 TOYOTA SEQUOIA Recall Check

Recall #:

05V225000

Recall Date:

2005-05-17

Component(s):

SUSPENSION: FRONT: CONTROL ARM: LOWER BALL JOINT

ON CERTAIN SPORT UTILITY VEHICLES, DUE TO A MANUFACTURING ISSUE IN THE FRONT SUSPENSION LOWER BALL JOINT, THERE IS A POSSIBILITY THAT THE SURFACE OF THE BALL OF THE JOINT MAY HAVE BEEN SCRATCHED. THE BALL JOINT MAY EVENTUALLY EXPERIENCE EXCESSIVE WEAR AND LOOSENESS, RESULTING IN INCREASED STEERING EFFORT.

Recall #:

06E049000

Recall Date:

2006-06-05

Component(s):

EXTERIOR LIGHTING

CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

Recall #:

10V176000

Recall Date:

2010-04-30

Component(s):

ELECTRONIC STABILITY CONTROL

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2003 SEQUOIA PASSENGER VEHICLES MANUFACTURED FROM APRIL 1, 2002 THROUGH APRIL 17, 2003. THE CENTER POSITION OF THE STEERING ANGLE SENSOR (SAS) MAY NOT BE STORED CORRECTLY DUE TO IMPROPER LOGIC OF THE SKID CONTROL ECU PROGRAMMING. THE VEHICLE STABILITY CONTROL (VSC) SYSTEM COULD ACTIVATE AT LOW SPEED FOR A FEW SECONDS DURING ACCELERATION FROM A STOPPED POSITION.

Recall #:

10V176000

Recall Date:

2010-04-30

Component(s):

TRACTION CONTROL SYSTEM

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2003 SEQUOIA PASSENGER VEHICLES MANUFACTURED FROM APRIL 1, 2002 THROUGH APRIL 17, 2003. THE CENTER POSITION OF THE STEERING ANGLE SENSOR (SAS) MAY NOT BE STORED CORRECTLY DUE TO IMPROPER LOGIC OF THE SKID CONTROL ECU PROGRAMMING. THE VEHICLE STABILITY CONTROL (VSC) SYSTEM COULD ACTIVATE AT LOW SPEED FOR A FEW SECONDS DURING ACCELERATION FROM A STOPPED POSITION.

Recall #:

15V286000

Recall Date:

2015-05-13

Component(s):

AIR BAGS

Toyota Motor Engineering & Manufacturing (Toyota) notified the agency on May 13, 2015, that they are recalling 2005-2007 Lexus SC, Toyota Corolla, Corolla Matrix, Sequoia, and Pontiac Vibe, and 2005-2006 Toyota Tundra vehicles that were originally sold, or ever registered, in Florida, along the Gulf Coast, Puerto Rico, Hawaii, the U.S. Virgin Islands, Guam, Saipan and American Samoa. On June 16, 2015 Toyota expanded the recall to cover an additional 769,055 vehicles, including certain model year 2002-2004 Lexus SC, Toyota Sequoia, 2003-2004 Toyota Corolla Matrix, Toyota Corolla, Pontiac Vibe, and Toyota Tundra vehicles, as well the vehicles covered by the May 13, 2015 notification in the portions of Georgia, Alabama, Louisiana, Mississippi and Texas that were not previously included. The inflators in the front passenger air bags are susceptible to rupture in the event of a crash necessitating the deployment of the front passenger air bag.

Recall #:

15V285000

Recall Date:

2015-05-13

Component(s):

AIR BAGS

Toyota Motor Engineering & Manufacturing (Toyota) notified the agency on May 13, 2015 that they are recalling certain model year 2004 Sequoia vehicles manufactured August 18, 2003, to August 19, 2004, and 2003-2004 Tundra vehicles manufactured March 18, 2003, to August 25, 2004. On June 16, 2015, Toyota expanded the recall to include an additional 1,270,468 vehicles, including model year 2002-2003 and 2005-2007 Sequoia, 2005-2006 Tundra, 2003-2007 Corolla, 2003-2007 Corolla Matrix, 2003-2007 Pontiac Vibe and 2002-2007 Lexus SC vehicles. This is to address a safety defect in the passenger side frontal air bag inflator which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. This recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. A replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.

Recall #:

18V883000

Recall Date:

2018-12-17

Component(s):

AIR BAGS: FRONTAL: PASSENGER SIDE: INFLATOR MODULE

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2002-2005 Lexus SC and Toyota Sequoia, 2003-2005 Toyota Corolla and Tundra, and 2003-2007 Pontiac Vibe vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation.

Recall #:

19V741000

Recall Date:

2019-10-17

Component(s):

AIR BAGS: FRONTAL: DRIVER SIDE: INFLATOR MODULE

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Recall #:

19V741000

Recall Date:

2019-10-17

Component(s):

AIR BAGS: FRONTAL: PASSENGER SIDE: INFLATOR MODULE

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.