FORD Recall Check

Recall #:

77V185000

Recall Date:

1979-10-12

Component(s):

POWER TRAIN: AUTOMATIC TRANSMISSION: LEVER AND LINKAGE: COLUMN SHIFT

ON THE INVOLVED VEHICLES, THE PARK ACTUATION SUPPORT PLATES ARE DEFECTIVE DUE TO THEIR SUSCEPTIBILITY TO CRACKING DUE TO IMPROPER HEAT TREATMENT DURING MANUFACTURE. AS A RESULT, FRAGMENTS FROM A BROKEN PLATE CAN BECOME LODGED IN THE TRANSMISSION PARKING PAWL MECHANISM. THIS COULD PREVENT THE TRANSMISSION PARKING PAWL FROM ENGAGING WHEN THE SELECTOR LEVER IS PLACED IN THE "PARK" POSITION, OR PREVENT THE PAWL FROM BEING DISENGAGED FROM THE PARK GEAR.

Recall #:

78V096000

Recall Date:

1979-10-12

Component(s):

POWER TRAIN: AUTOMATIC TRANSMISSION

SOME OF THESE VEHICLES MAY BE EQUIPPED WITH AUTOMATIC TRANSMISSIONS THAT WERE ASSEMBLED WITH IMPROPERLY MANUFACTURED CAST IRON EXTENSION HOUSINGS. THE HOUSINGS HAVE MISLOCATED CAST CAM PLATE STOPS. A MISLOCATED STOP MAY PREVENT THE TRANSMISSION FROM LOCKING IN THE PARK POSITION WHEN THE GEAR SHIFT SELECTOR LEVER IS PLACED IN THE "P" (PARK) POSITION. IF THIS OCCURS A DRIVER MAY RELY UPON THE READING ON THE GEARSHIFT SELECTOR LEVER INDICATOR AND MAY ASSUME THAT THE TRANSMISSION PARKING GEAR IS ENGAGED.

Recall #:

77V140000

Recall Date:

1979-10-12

Component(s):

POWER TRAIN: AUTOMATIC TRANSMISSION: LEVER AND LINKAGE: COLUMN SHIFT

THE INVOLVED VEHICLES WERE FITTED WITH TILT STEERING COLUMNS CONTAINING TRANSMISSION CONTROL INSERTS INTENDED FOR TRUCKS RATHER THAN PASSENGER VEHICLES. THIS MAY CAUSE THE TRANSMISSION SELECTOR POINTER TO BE MISALIGNED AND THE POSSIBILITY OF STARTING THE ENGINE WHEN THE SELECTOR IS BETWEEN THE NEUTRAL (N) AND DRIVE (D) DETENTS AND THE TRANSMISSION IS IN DRIVE.

Recall #:

77V185000

Recall Date:

1979-10-12

Component(s):

POWER TRAIN: AUTOMATIC TRANSMISSION: LEVER AND LINKAGE: COLUMN SHIFT

ON THE INVOLVED VEHICLES, THE PARK ACTUATION SUPPORT PLATES ARE DEFECTIVE DUE TO THEIR SUSCEPTIBILITY TO CRACKING DUE TO IMPROPER HEAT TREATMENT DURING MANUFACTURE. AS A RESULT, FRAGMENTS FROM A BROKEN PLATE CAN BECOME LODGED IN THE TRANSMISSION PARKING PAWL MECHANISM. THIS COULD PREVENT THE TRANSMISSION PARKING PAWL FROM ENGAGING WHEN THE SELECTOR LEVER IS PLACED IN THE "PARK" POSITION, OR PREVENT THE PAWL FROM BEING DISENGAGED FROM THE PARK GEAR.

Recall #:

78V096000

Recall Date:

1979-10-12

Component(s):

POWER TRAIN: AUTOMATIC TRANSMISSION

SOME OF THESE VEHICLES MAY BE EQUIPPED WITH AUTOMATIC TRANSMISSIONS THAT WERE ASSEMBLED WITH IMPROPERLY MANUFACTURED CAST IRON EXTENSION HOUSINGS. THE HOUSINGS HAVE MISLOCATED CAST CAM PLATE STOPS. A MISLOCATED STOP MAY PREVENT THE TRANSMISSION FROM LOCKING IN THE PARK POSITION WHEN THE GEAR SHIFT SELECTOR LEVER IS PLACED IN THE "P" (PARK) POSITION. IF THIS OCCURS A DRIVER MAY RELY UPON THE READING ON THE GEARSHIFT SELECTOR LEVER INDICATOR AND MAY ASSUME THAT THE TRANSMISSION PARKING GEAR IS ENGAGED.

Recall #:

78V047000

Recall Date:

1979-10-12

Component(s):

SEAT BELTS: FRONT: RETRACTOR

THE AUTOMATIC LOCKING REAR SEAT BELT RETRACTORS ON CERTAIN VEHICLES MAY FAIL TO LOCK DUE TO BINDING OF THE LOCKING PAWL AGAINST THE RETRACTOR HOUSING. THIS BINDING IS CAUSED BY RETRACTOR HOUSING DEFORMATION WHICH OCCURRED DURING ASSEMBLY. AS A RESULT THE PASSENGERS WOULD BE RESTRAINED ONLY BY THE FULLY EXTENDED BELT. THIS FAILS TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION".

Recall #:

78V035000

Recall Date:

1979-10-12

Component(s):

POWER TRAIN: AUTOMATIC TRANSMISSION: LEVER AND LINKAGE: COLUMN SHIFT

THE SHIFT SELECTOR REACTION SPRINGS MAY BE DEFORMED AS A RESULT OF IMPROPER INSTALLATION OF SELECTOR LEVERS DURING COLUMN BUILDUP. THUS THE LEVER MAY NOT BE ABLE TO BE MOVED INTO THE INSERT DETENTS LOCATED IN THE STEERING COLUMN ASSEMBLY. THIS COULD PREVENT THE "PARK" GEAR FROM BEING ENGAGED.

Recall #:

77V185000

Recall Date:

1979-10-12

Component(s):

POWER TRAIN: AUTOMATIC TRANSMISSION: LEVER AND LINKAGE: COLUMN SHIFT

ON THE INVOLVED VEHICLES, THE PARK ACTUATION SUPPORT PLATES ARE DEFECTIVE DUE TO THEIR SUSCEPTIBILITY TO CRACKING DUE TO IMPROPER HEAT TREATMENT DURING MANUFACTURE. AS A RESULT, FRAGMENTS FROM A BROKEN PLATE CAN BECOME LODGED IN THE TRANSMISSION PARKING PAWL MECHANISM. THIS COULD PREVENT THE TRANSMISSION PARKING PAWL FROM ENGAGING WHEN THE SELECTOR LEVER IS PLACED IN THE "PARK" POSITION, OR PREVENT THE PAWL FROM BEING DISENGAGED FROM THE PARK GEAR.

Recall #:

81V008000

Recall Date:

1981-02-12

Component(s):

POWER TRAIN: AUTOMATIC TRANSMISSION: GEAR POSITION INDICATION (PRNDL)

THIS IS A MANUFACTURER"S NOTICE TO ADVISE OWNERS OF PROPER VEHICLE OPERATION. THE PARKING GEAR MAY NOT BE SECURELY ENGAGED AFTER THE OPERATOR HAS ATTEMPTED TO SHIFT TO PARK. THE VEHICLE MAY APPEAR TO BE IN PARK THOUGH ACTUALLY IN REVERSE. THIS COULD ALLOW THE VEHICLE TO MOVE UNEXPECTEDLY.

Recall #:

78V047000

Recall Date:

1979-10-12

Component(s):

SEAT BELTS: FRONT: RETRACTOR

THE AUTOMATIC LOCKING REAR SEAT BELT RETRACTORS ON CERTAIN VEHICLES MAY FAIL TO LOCK DUE TO BINDING OF THE LOCKING PAWL AGAINST THE RETRACTOR HOUSING. THIS BINDING IS CAUSED BY RETRACTOR HOUSING DEFORMATION WHICH OCCURRED DURING ASSEMBLY. AS A RESULT THE PASSENGERS WOULD BE RESTRAINED ONLY BY THE FULLY EXTENDED BELT. THIS FAILS TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION".