Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
Can you tell me the recommended oil type and the amount of oil needed for a 2000 Subaru Forester?
3178 views
2 answers
★ Top Answer
The 2000 Subaru Forester is equipped with two engine options, either a 2.0-liter or a 2.5-liter. Regardless of the engine type, you will need 4.2 quarts of oil, and you can choose from different viscosity grades such as 0W-30 to 10W-40. The recommended default oil for your Subaru is SAE 5W-30. It's advised to change the oil every 3,000 to 6,000 miles. A good choice for oil is Valvoline's High Mileage with MaxLife Technology SAE 5W-30 Synthetic Blend Motor Oil, priced at about $17 for a 5-quart container, which is more cost-effective than full synthetic. The WIX51365 filter is highly popular among Forester owners and can be purchased online for around $10. A common challenge when changing oil in Subarus is the 14-millimeter oil drain bolt, which can easily strip. To address this issue, owners often replace it with the 17-millimeter bolt, identified by OEM part number R807016210.
More answers
-
The 2.5-liter boxer engine in the 2000 Subaru Forester needs 4.2 quarts of 5W-30 oil, which is the preferred choice. However, there are other oil viscosities to consider based on specific conditions. For temperatures below 104 degrees Fahrenheit, stick with 5W30. For temperatures above -4 degrees Fahrenheit, consider using 10W30 or 10W40. If it's above 95 degrees Fahrenheit or experiencing heavy-duty use, you can opt for 30 weight, 40 weight, 10W50, 20W40, or 20W50 oils.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
