Vehicle Questions and Answers

Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!

How can I clear the oil change reminder on a 2018 Dodge Grand Caravan?

13022 views

7 answers

★ Top Answer
Spike Spiegel

To remove the Oil Change Required notification on a 2018 Dodge Grand Caravan, begin by switching the ignition to the ON/RUN mode without starting the engine. Then, gently press the accelerator pedal all the way down three times within 10 seconds. Finally, switch the ignition to the OFF/LOCK mode. If the notification reappears when you start the vehicle, you must repeat the procedure. It is important to reset the oil message only after getting the oil and filter replaced. The Grand Caravan can hold up to 6 quarts of Mopar SAE 5W-20 engine oil or a similar product that meet FCA Material Standard MS6395 requirements. Both conventional and synthetic oils are suitable as long as they meet the necessary quality criteria.

More answers

  • Anisha C

    with a 2018 Dodge Grand Caravan, just turn the ignition key to the "on" position.

  • Susan V

    Can I really disable the oil change light? And what causes it to come on in the first place?

  • Sonia K.

    I have turned the ignition on, pressed and released the button three times slowly, turned the ignition off, repeated this process four times, but the "change oil" message still appears on the screen. I have recently replaced the oil.

  • Calvin R

    Forget it. It needs to be in the first position, not the secondary position, which is acc.

  • Chad F

    To clear the oil change reminder on a 2018 Dodge Grand Caravan, start the car without turning on the engine. Within 10 seconds, gently push the gas pedal down three times in a row. Next, switch off the ignition. Repeat the process if necessary.

  • Sharyn R

    To perform a pre-start procedure on your car, first turn the key in the ignition without actually starting the engine. Next, press the gas pedal three times, turn off the ignition, and then start the car as usual.

Buying a Used car?
Check it by Epicvin
  • NIADA Logo
  • Blockchain confirmed data
  • NMVTIS Logo