How can I take off the hood vent on a 2017 Ford Raptor?

★ Top Answer

To take off the hood vent of the 2017 Ford Raptor, you'll need a long prybar, an 8mm socket, and a 10mm socket. First, lift the front hood of the Raptor and detach the insulation by disconnecting its wiring on each side with the 8mm socket. This will expose a single bolt securing the vent on the driver's side. Use the 10mm socket to loosen this bolt. Then, use the prybar from under the hood to push the vent from various angles until it disconnects from the top of the raised cowl. To fully remove the vent, unclip it at the four corners and at several spots in the middle of the assembly from the top of the vehicle.

0