How to reset the oil light on a 2016 Volvo XC60?

2151 views

4 answers

★ Top Answer

john Garofoli Feb 24, 2021

Resetting the oil light on a 2016 Volvo XC60 is a straightforward procedure. Begin by switching the ignition to the first position. Then press and hold the trip odometer reset button. Keep holding the button for ten seconds and release it when the information lamp begins to flash. You will hear a beep if the reset is successful, and the SRI light will go off. Turn off the ignition for at least three minutes and then start the car to confirm that the indicator has been reset properly. You are now all set to go, with no further action needed.

More answers

Nicky Graham Jan 21, 2023

To reset the maintenance indicator on a 2016 Volvo XC60, follow these steps: 1. Insert the key into the slot below the ignition button. 2. Press the ignition button once to position 1. 3. Press and hold the OK button (trip odometer reset) on the turn signal stalk. Keep holding the OK button while pressing the ignition button until all dashboard lights come on to position 2. 4. Keep holding the OK button for 10 seconds. Let go of the OK button when the information light (yellow letter i in a square at the center of the dashboard) starts flashing. 5. You will hear an audible beep when the reset is successful, and the information light will turn off. 6. Turn off the ignition for 3 minutes, then start the engine to confirm that the indicator has been reset.
Eva R May 10, 2024

The responses before are incredibly dumb. The 2016 model doesn't have a key or reset button. Complete idiots.
jamiela May 15, 2020

To reset the oil on a 2016 Volvo XC60, start the car without turning on the engine. Locate the reset button on the dashboard console and press and hold it. After the light blinks and stops, turn off the vehicle and wait for 5 minutes. The oil reset is now complete.

Buying a Used car?
Check it by Epicvin