What could be the reason behind an oil leak on the driver's side of a Nissan Murano?

To address an oil leak in the Nissan Murano, there are three common reasons for this issue. The first could be a leak from the oil pan due to a faulty seal around the drain plug. Alternatively, there might be corrosion in the lines causing oil to seep out through a small opening. Lastly, a damaged connector for the line could be causing a leak at the connection point. Low oil levels are problematic, so it's essential to top up the oil. When conducting an oil change on the vehicle, ensure it has been parked and turned off for a couple of hours to let the oil cool down. To start, locate the oil pan in the engine bay and find the drain plug underneath. Place a bucket beneath the plug and remove it to allow the oil to drain out completely. This process may take around an hour. Once the dripping stops, reattach the drain plug. Look for the intake port on top of the oil pan and use a funnel to refill the oil pan to the full mark. Avoid overfilling as this can result in leaks and excessive oil consumption. After filling it up appropriately, seal the port, clean up any spills, and you're done.